Belkin SHARE 8820ED00394_F7D3402_V1 - Manual (Page 22)

22
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
Troubleshooting
The setup CD does not automatically start .
If Belkin Setup does not run when you insert the CD-ROM, your
computer may not be configured to open CDs automatically .
If Belkin Setup does not appear within 15 seconds, browse
to your CD-ROM drive and open the “Belkin Setup” icon .
Alternatively, you may visit http://router/ and perform the
setup manually . Please see “Manual Setup Using Your
Browser” earlier in this manual for more information .
belkin setup cannot find my Router .
If Belkin Setup is not able to communicate with your Router during
the installation process, please check the following items .
1 . Make sure that the wireless hardware on your
computer is turned on, if available .
2 . Try connecting your computer to one of the four “wired”
ports on the Router with an Ethernet cable .
3 . Ensure that the Router is on . The front-panel light should be on .
4 . Unplug the Router’s power supply for 10
seconds, then plug it back in .
5 . There may be firewall software on your computer preventing
an outgoing connection . You may choose to temporarily
disable this software before attempting setup .
If Belkin Setup still cannot find the Router, you might choose
to do a manual setup . Refer to “Manually Configuring
Network Settings” in this manual for details .