Belkin SHARE 8820ED00394_F7D3402_V1 - Manual (Page 23)

23
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
belkin setup cannot connect my Router to the Internet .
If Belkin Setup is not able to connect the Router to
the Internet, please check the following items:
1 . Use the troubleshooting suggestions within Belkin Setup .
2 . If your ISP requires a user name and password, make sure that
you have typed in your user name and password correctly . Some
user names require that the ISP’s domain may be at the end of the
name . Example: “myname@myisp .com” . The “@myisp .com” part of
the user name may need to be typed as well as your user name .
3 . If you continue to have no Internet connection, refer
to “Manually Configuring Network Settings” in this
manual for an alternative setup method .
belkin setup completed installation, but I cannot browse the
Web . The light on the front of my Router is blinking amber .
1 . Make sure the Router is connected to your ADSL line with an
RJ11 (telephone) cable via the Router’s one gray ADSL port .
2 . Check that the modem (ADSL) connection is
connected to your broadband (ADSL) socket on the
wall (via an ADSL filter if one is required) .
3 . Unplug your Router’s power supply, wait 10 seconds,
and plug it back in . This will cause the Router to try to
reestablish communication with the ADSL line .