Bendix Commercial Vehicle Systems WINGMAN ADVANCED SD - Manual (Page 46)

46
Appendix C
How to Read and Reset Wingman ® Diagnostic Trouble Codes with ACom ® Diagnostics
1. Click Bendix ACom desktop icon 2. Select “Wingman” from the starter screen. Click “start with
ECU”
3. Read Wingman Advanced status screen.
A. Take Note of:
Model #,
Software Version,
Software P/N,
Active DTCs
B. Click
DTCs
4. Click "Read". Active DTCs (diagnostic trouble codes) are
shown along with descriptions of the codes and tests that can
be run to troubleshoot the code. You can select “stored DTCs”
also, to show inactive DTCs.
5. Click “clear” to clear all active DTCs. Click “Report” to
get the ACom report.
6. Fill in the requested information: Company, location,
technician, date/time, VIN, and click “OK”
7. Select how you want the report displayed or printed.
Then click “OK”
8. The event report is generated. This can be saved if desired.
9. You can also use the shortcut menu at the top of the screen and select: Advanced status; DTCs; and Controller
Confi guration.
Call the Bendix Tech Team at 1-800-AIR-BRAKE for troubleshooting assistance.
APPENDIX C - HOW TO READ AND RESET THE BENDIX ® WINGMAN ® SYSTEM DIAGNOSTIC
TROUBLE CODES USING BENDIX ® ACOM ® DIAGNOSTICS SOFTWARE (VERSION 6.3 OR HIGHER)
Appendix C