Bendix Commercial Vehicle Systems SMARTIRE TPMS OPERATORS MANUAL - Manual (Page 51)

51
6.5.3 Wireless Gateway Connector Pin Description
Line Colors versus Pin Numbers for SmarTire
™
Harnesses (configuration may vary by
harness in terms of populated pins):
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13
Line
Color
Black Red Orange Red Grey Pink
White
&Red
Purple White Blue Green Yellow Black
Pin 14 15 16 17 18 19 20 21 22 23 24 25 26
Line
Color
Black Red Black N/A N/A N/A N/A N/A N/A N/A Black
Clear
or
White
Black
The general purpose I/O lines are:
 3 digital inputs, 0 – 32V (pins 4, 5 and 6)
 2 high-side drivers, 2A max each (pins 7 and 8)
 1 low-side LED driver, 0.15A max (Pin 3)
 Pins 1, 14, 24, 26, 13: Common Grounds
6.6 SMARTIRE
™ DISPLAY SPECIFICATIONS
6.6.1 Power, Mounting, and Environmental Requirements
 Operating voltage range 8.5 – 36V
 Typical current consumption (with no external loads) 30mA
 Connector type: 1062-16-0122-Deutsch
 Lock: W6S-Deutsch
 Plugs:
DT06-6S-Deutsch
 SAE J1939 protocol compliant, 250 kbps