Bird Technologies SA-1700-P - Manual (Page 26)

Bird Site Analyzer
16
!
Press the CALIBRATE key.
!
Attach the open standard.
Press the OPEN key.
Wait for a “beep” and for the trace to scroll before
continuing.
!
Attach the short standard.
Press the SHORT key.
Wait for a “beep” and for the trace to scroll before
continuing.
!
Attach the load standard.
Press the LOAD key.
Wait for a “beep” and for the trace to scroll before
continuing.
!
Press the CAL DONE key. New coefficients are
calculated. The Site Analyzer is now calibrated.