Brother DCP 8065DN - Manual (Page 79)

Troubleshooting
67
10
(5) Make the following selection. Make sure that your print server appears. If it is visible, then the
connection is good.
4
If you have tried 1 to 4 above and it does not work, then reset the print server back to the default factory
settings and try from the initial setup again. For information how to reset to the default factory settings,
see Restoring the network settings to factory default on page 30
Error during printing
If you try to print while other users are printing large amounts of data (e.g. many pages or colour pages with
high resolution), the printer is unable to accept your print job until the ongoing printing is finished. If the waiting
time of your print job exceeds a certain limit, a time out situation occurs, which causes the error message. In
such situations, execute the print job again after the other jobs are completed.
Protocol-specific troubleshooting
Windows ® 2000/XP IPP troubleshooting
Want to use a different Port number other than 631.
If you are using Port 631 for IPP printing, you may find that your firewall may not let the print data through. If
this is the case, use a different port number (port 80), or configure your Firewall to allow Port 631 data
through. To send a print job using IPP to a printer using Port 80 (the standard HTTP port) enter the following
when configuring your Windows
® 2000/XP system.
http://ipaddress/ipp
Get More Info option in Windows ® 2000 not working
(Mac OS ® X 10.2.4 - 10.3.x)
(Mac OS ® X 10.4)