Bird Technologies VPM3 - Manual (Page 49)

41
Menu Bar
File
See “File” on page 17.
Mode
See “Mode” on page 18.
Configure
Note:
This menu will change depending on the sensor being displayed.
Scale
Specifies the maximum of the Upper Range.
Run Mode
There are two settings to choose from:

Normal - Takes one measurement and stops.

Clear Restart - Once a measurement has been completed and dis-
played another is started automatically.
Bandwidth
There are four settings to choose from:

No Filter

5 kHz

5 MHz

20 MHz
Confidence Factor
Sets the duration of the measurement.
Percentage -
Acquires sufficient samples to achieve an error tolerance of +/-
0.1% with the specified confidence factor.
Number of Samples - Acquires at least the specified number of samples.
Time Duration -
Acquires samples for at least the specified amount of time.