Bretford CDM-8500 - Manual (Page 27)

Chapter 4 - Page 51 Page 50 - Chapter 4
Scans the channels to stay connected to any available
system of BELL MOBILITY.
SET MODE
Selects the Preferred System.
1. Press .
2. Select one of the following options(Home only/
Analog only/Automatic) with the navigation key,
then press .
FORCE ANALOG
Temporarily forces phone to use Analog mode – mode
automatically ends in 10 minutes.
1. Press .
2. Select “Yes” or “No” with the navigation key, then
press to activate it.
ROAMING ROAMING
NAM SETTING
Enables Auto NAM (Number Assignment Modules) or
manually changes a NAM.
ROAMING ROAMING
AUTO NAM
To automatically switch phone to the proper NAM when
you have multiple NAM registrations:
1. Press .
2. Select “Yes” or “No”, then press to save it.
CHANGE NAM
To change the NAM used by the phone when you have
multiple registrations:
1. Press .
2. Select a NAM (NAM1,NAM2) with the navigation
key, then press to save it.
● Automatic : Scans the radio channels based on the
Automatic setting.
● Home only : Only within your home area or home
affiliated area.
● Analog Only : Stays in the analog setting until the hand
set is powered on after being powered off.
50C-Bell south 10/4 2002.10.4 6:47 PM Page 52