Blizzard Lighting Fab 5 RockLite (Rev A) - Manual (Page 14)

Page 14
RockLite™ Fab5 Manual Rev. A © 2013 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fixture is DMX, which appears as
d001
on the LED readout. To select a
different DMX address, using the <MENU> button, select
Addr
, then hit <ENTER>. Use the <UP/
DOWN> buttons to select the correct address, then press the <ENTER> button again to confirm.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Flash/Fade Mode:
1.) To set the fixture in Flash or Fade mode, select
FLAS
or
FAdE
. To confirm, press the
<ENTER> button.
2.) Now, select the flash or fade speed using <UP/DOWN> buttons to reach
FL00 - FL15
or
FA00 - FA15
then hit <ENTER>.
* The speed adjustment settings range from 0 (fastest) to 15 (slowest).
Auto Mode:
1.) To use the fixture in Automatic Mode, select
ASC-
, then press the <ENTER> button.
2.) Now, select the speed using <UP/DOWN> buttons to reach
AC00 - AC15
then hit
<ENTER> to confirm.
* The speed adjustment settings range from 0 (fastest) to 15 (slowest).
Slave Mode:
1.) To set the fixture as a slave unit, select
SLAU
, and hit <ENTER>. The unit will display
SL.AU
to indicate that it is in slave mode.
Sound Active Mode:
1.) To use sound active mode, select
SouA
, then press the <ENTER> button to confirm.
Standalone (Program) Mode:
Allows a single unit to display a variety of colors and programs without a DMX controller.
1.) To set the fixture in manual mode, select
Pr--
. To confirm, press the <ENTER> button.
2.) Now, select the program by using the <UP/DOWN> buttons to select
Pr00-Pr35
. To
confirm, press the <ENTER> button.
NOTE:
Pr00-Pr31
are static R/G/B/A/W colors + mixed colors.
Pr32-Pr35
are four different
chase programs that are speed adjustable.
3.) To adjust the speed of these chases, navigate to
SP--
, press the <ENTER> button. Now use
the <UP/DOWN> buttons to choose from
SP00
(fastest) to
SP15
(slowest). Then press the
<ENTER> button to confirm.
Manual Color Adjustment:
Allows the user to adjust the color balance of the fixture. These settings are global, they will effect
all modes.
1.) Use the <MENU> and <UP/DOWN> button to select
rL--
(Red Level),
GL--
(Green Level),
bL--
(Blue Level),
AL--
(Amber Level), or
UL--
(White Level), then hit <ENTER>.
2.) Using the <UP/DOWN> buttons, select the maximum level for each color between x000-x255
(000=off), then hit <ENTER> to confirm.