BLUESHAPE BUBBLEPACK User Manual
Page 3
3
Package contents
•
Bubblepack 65Wh battery
•
Camera Adapter base
•
Battery charger with mains cable
•
BSTAP connector with 50cm cable
•
Operating manual
Introduction
Bubblepack is a universal 65Wh, battery pack with multiple voltage
outputs.
The device is intended for fixing underneath a camera to supply
power to it and its accessories. The whole arrangement can also be
mounted on a tripod if needed.
Outputs
Range
Connection
Designation
14.8V /7A max
12.6V min ~ 16.8V max
2 x D-TAP
HIGH
11.2V /5A max
selected by switch
2 x BSTAP*
LOW
8.4V /5A max
selected by switch
2 x BSTAP*
LOW
All LOW outputs are regulated
*BSTAP is a custom BLUESHAPE connector (blue)
Features
•
Sturdy mechanical design
•
Detachable (sliding) adapter with spring loaded, dual hooking
mechanism
•
Lever arm for tight, low tolerance locking of adapter base to rail,
ensuring shake-free operation during shooting
•
Adjustable positioning of adapter base on rail for achievement
of optimum camera balance
•
Super compact, high energy density and lightweight assembly
•
Stylish external looks
•
Can be mounted on a standard tripod
•
Choice of 3 voltage outputs @ high current
•
Choice of 4 output connectors (2 x D-TAP, 2 x BSTAP)
•
Comprehensive electrical safety/ energy saving features
•
Full short-circuit /overload protection
•
Convenient, 4 LED voltage based gas gauge
•
High efficiency Li-ion battery charger included
•
Can power a wide range of cameras using special accessories
(available extra) such as cables and battery eliminators. Please
visit
www.blueshape.net
for more information.