BLUESHAPE BUBBLEPACK User Manual
Page 7
7
How to charge Bubblepack
A fast charger has been included in the package.
Simply connect the charger to one of the HIGH outputs on
Bubblepack and the device will charge. It is expected that the device
reaches full charge from empty within 2 ~ 3 hours. The LED on the
charger will be red during charging but will turn to green when
charge is completed. It is recommended to charge Bubblepack on
first use or after a long period of shelf life or inactivity.
Purpose of the locking arm
The adapter base is designed to slide with ease into the
corresponding rail profile on the battery. This enables the user to
determine the best 'notch position' for optimum balance.
It is of vital importance that camera shake is not present during
shooting when the camera and Bubblepack are mounted on a
tripod, The arm mechanism on Bubblepack locks the base with the
battery to unite and tighten the combination and reduce mechanical
clearances (and therefore, overall shake), to a negligible amount .
LOCK
UNLOCK