Boomba Racing ST Focus Transmission Cable Bracket Bushings - Manual (Page 2)

1 Remove plastic vacuum hose from rubber
adaptor on the top of valve cover (leave
rubber adaptor in place).
13
Fasten the bracket to the transmission.
The thin bushing goes between the
bracket and the transmission.
Thick bushing goes on the top of the
bracket. 14
Reinstall the shifter cables.
15
Snap on the shifter cable connector.
16
Reinstall the battery tray and the air box.
Tighten the hose clamps. Reinstall the
battery cover, the air filter and the filter
cover. Reconnect the MAF sensor
connector.