Boomba Racing WRX Subaru 2015+ Short Throw Shift Lever - Manual

SUBARU WRX ‘15+
SHORT THROW SHIFTER
2 Remove the heat shield. 3 Remove the shifter cover plate. 4 Pry off the side shift cable.
5 Spread the locking spriig apart and
disconnect the main shift cable. 6 Remove the nuts holding the shifter
assembly from the bottom. 7 Remove the shift knob. 8 Remove the hand brake booth by pulling it
upward.
9 Remove the front bolt securing the center
console.
10
Remove the rear bolts securing the center
console. Move the center console to the
back.
11
Remove the shifter cover by pulling it
back.
MATERIALS REQUIRED
White lithium grease
TOOLS REQUIRED
M7, M8, M10, M12 sockets
M10, M12, M15 box
M3 allen wrench
Flat screw driver
Phillips screw driver
Snap ring pliers Small punch
Hammer
12
Remove the side panel screws and the
shifter base screws.
1 When lifting the car
always use stands to
secure the car.