Boomba Racing Evo X Mitsubishi Ralliart Fuel Rail - Manual (Page 2)

19
Install the vacuum hose. Plug fuel
injectors. Secure the wire harness.
20
Reinstall the engine cover.
13
Install fuel injectors in the Boomba Fuel
Rail and secure them with clips.
14
Remove hose clamps from factory fuel
return hose and install them on the 6mm
fuel hose.
15
Secure the vacuum hose and the fuel
return hose to the fuel pressure regulator.
16
Install Boomba Fuel Rail and secure it to
the manifold with bolts.
17
Install the fuel pressure regulator. Route
hoses under regulator. Connect the
vacuum hose to the intake manifold.
Connect the fuel return hose to the return
tube. Secure it with the hose clamp. Bolt
the fuel pressure regulator to the rail.
18
Connect the fuel supply line to the
manifold. Make sure that connector is
pressed all the way in and secure it with
the clip.