Boomba Racing WRX Subaru Impreza Fuel Rail - Manual (Page 5)

67
Shorten the regulator’s output by about 1
inch.
68
Bolt fuel pressure regulator to the top of
the Boomba Distributor Block.
61
Remove fuel rails.
62 63
Remove the fuel rail bracket’s bolts.
64
65 66
Remove the fuel pressure regulator.
71
Install and bolt down the wire harness.
72
Reinstall the intake monifold.
69
Cut the bracket connecting vent pipe to
the right “Green bracket” to separate the
pipe from the bracket.
70
75
Reinstall all throttle body’s connectors and
hoses.
76
Reinstall the connections to the solenoid
valve.
73
Install fuel injectors and Boomba Fuel
Rails.
74