Bowers Group Universal Gauge with extra long measuring arms - Manual

BOWERS METROLOGY
Bowers Metrology Ltd
32 Leeds Old Road, Bradford, England, BD3 8HU
Tel :(0044) 01274 223456 Fax :(0044) 01274 223444
Email : [email protected]
UNIVERSAL GAUGE WITH
EXTRA-LONG MEASURING
ARMS
TECHNICAL BULLETIN
For prices and further information, please contact Alan Corner at
Bowers Metrology in Bradford, England.
Measuring arms of length 200 mm are now available for the
standard Universal Gauge. The new measuring arms can be
used for both internal and external measurement and are
particularly useful for deeper internal measurements or for
bridging high spigots and shoulders. Extra stability is
provided by a rear support strut and standard depth stops
can be fitted just as for standard length measuring arms.
Universal Gauge standard features :
• Range 30-250mm internal / 0-215mm external
• 15 mm anvil travel
• Constant measuring pressure
• Digital or mechanical readout
• 150 mm and 500 mm extensions available
• Measuring table and supports available for conversion to bench
gauge for the measurement of small components.