Brother HL 1270N - Manual (Page 30)

1-22
To print on thicker paper and card stock
When you rear cover is lifted up, the printer has a straight paper path from the manual feed
slot to the rear of the printer. Use this paper feed and output method when you want to print
on thicker paper or card stock.
☛ 1.
Select manual feed mode in the printer driver.
☛ 2.
Lift up the rear cover at the rear of the printer.
Fig. 1-17 Lift up the rear cover
☛ 3.
Send the print data as usual.
✒ Note
A “NO PAPER” message is shown in the Status Monitor until you insert a sheet of paper into
the manual feed slot.