Brother HL 1270N - Manual (Page 80)

4-14
!
Caution
To prevent damage to the printer caused by static electricity, do not touch the electrodes
shown below.
Fig. 4-9 Electrodes
    5.
Open the rear cover and pull the jammed paper out of the fuser unit.
If you have to pull the paper toward the back of the printer, the fuser may get dirty with toner
powder and may result in scattered toner on the next printed page or pages. Print a few copies
of the test page until the toner scatter on the printed pages stops.
Fig. 4-10 Pull out the jammed paper
    6.
Close the rear cover.
    7.
Re-install the drum unit assembly and close the front cover.