Rpm installation – Bully Dog 40605 John Deere 8030 and 8020 Series Module User Manual
Page 8

7
rPm inSTAllATiOn
The Rapid Power module will increased power and capability for your 8020 series tractor. Without changing the
wiring harness the Rapid Power Module can be modified to work with the 8020 series tractor. The Module will
provide you the power and reliability that you have come to expect from Bully Dog Technologies.
1.:
Open Hood of Tractor, install module when engine
is not running and is cool.
2.:
Place module below the air filter in a safe location
and run cable along the wiring harness toward the
front of the engine.
3.:
Locate the Fuel Rail pressure sensor.
4.:
Remove female plug from the Fuel Rail pressure
sensor located on the right side of the engine.
8020 SerieS inStall inStructionS
Fuel Rail Sensor Plug
Male Fuel Rail Sensor Plug
Female Fuel Rail Sensor Plug