Bully Dog 40450 GTT+ - Manual (Page 26)

40450
GT T
+
25
uPDAtInG the Gt t+
(DETAILED STEPS FOR WINDOWS)
8. NOTE: This step varies depending on how you have connected the Bully Dog to your computer.
• If you have the Micro SD card connected to the computer:
- Disconnect it from the computer and put it in the GT T+.
- Then turn the GT T+ on by connecting it to a computer or to a vehicle and turning the key to the Run position.
• If you have the GT T+ connected to the computer:
- Press the second key from the top on the left side to get out of USB mode.
OR
- Disconnect the GT T+ from the computer, plug it in to your vehicle, and turn the
key to the Run position.
9. Go to the Main Menu on your GT T+.
10. Go to the bottom of the menu and choose Update GT T+ Software.
• If the Update GT T+ Software option is not available on the Main Menu:
- Choose Update GT T+ Firmware.
OR
- Scroll to the top and choose Change Vehicle, then select your vehicle from the list.
11. Confirm that you want to load the file.
12. Let the GT T+ load the file and reboot. Do not disconnect it or turn it off during this part of the process.
the Gt t+ has now been updated!