Gauge setup (continued) – Bully Dog 40410 50 State Legal GT Gas User Manual
Page 12
40410
50 S
ta
te GT G
as
11
Gauge Setup (continued)
A/F Ratio 1 & 2
This gauge option shows the ratio of air to fuel. The GT will use
this information to ensure that your engine is using the correct
ratio to completely burn all of the fuel being used and maximize
performance and efficiency.
Only available on Bully Dog Sensor Docking Station part number
40385.
AUX 1, 2 & 3
This gauge option shows the information from sensors connected to
the 0-5V auxiliary inputs on the Bully Dog Sensor Docking Station.
AUX Temp
This gauge option shows the information returned to the Sensor
Docking Station by an optional temperature sensor. The port for
this sensor is marked as 5V out.
Frequency
This gauge option shows the information from a pulsing type of
sensor, like an on-board speed sensor or another optional sensor
that operates on the 0-5kHz 5V pulse range. The port on the Bully
Dog Sensor Docking Station for this gauge option is marked as FN.
The following gauge options are provided to allow the GT to monitor additional sensors that are only available with the
Bully Dog Sensor Docking Station.