Bully Dog 3330x Custom Gauge Pods - Manual (Page 14)

13
32304: Dodge Ram® 2010+
1. Remove the bolt that holds the stock A-pillar in place.
a. It is located about halfway down the pillar behind a
small oval cover piece.
b. Remove the cover piece and set it aside.
c. Use a 10 mm socket.
2. Pull out the weather stripping around the A-pillar (so it
can be moved easily).
This model comes prematched
to the vehicle so it does not
require any paint.
Bill of Materials
POD
Screw