Bully Dog 53105 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 11)

10
RFI COLD AIR INTAKE
2. Install the Stage 2 RFI Tube.
a. Connect the couplers to the Stage 2 RFI Tube and
the turbo inlet.
b. After all connections are in the correct place, tighten
the band clamps. (Use a flat-head screwdriver.)
3. Install the Air Filter.
a. Connect it to the end of the Stage 1 RFI Tube that is
inside the RFI Base.
b. Tighten the band clamp. (Use a flat-head
screwdriver.)
4. Install the RFI Lid.
a. Make sure that it is properly aligned.
b. Snap the latches on the base over the mounts on
the lid.