Bully Dog 52103 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 12)

11
RFI COLD AIR INTAKE
3. Install the air filter.
a. Connect it the end of the RFI tube that is inside the
RFI base.
b. Tighten the band clamp. (Use a flat-head
screwdriver.)
4. Install the RFI lid.
a. Make sure the lid is properly aligned.
b. Snap the latches over the mounts on the lid.
5. Reconnect the sensor plugs (MAF and temperature) and
the battery. Start the vehicle, listen for leaks and check
all connections. Go for a ride and enjoy!