Bully Dog 51205 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 9)

8
RFI COLD AIR INTAKE
2. Secure RFI lid to the stock box by closing the latches on the
box.
3. Connect the silicon couplers to the turbo intake tubes. Do
not tighten the band clamps until both everything is in the
correct position.
4. Use a flat-head screwdriver to tighten the band clamps.
5. Reconnect the temperature sensor plug and the vehicle
battery. Start the vehicle to listen for leaks and check all
connections. Go for a ride and enjoy!