Bully Dog 51203-99 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 12)

11
RFI COLD AIR INTAKE
Installing the RFI Intake
1. Install the RFI lnstall the RFI lid/tube assembly.
• Line up the latch mounts on the lid with the latches on
the stock intake enclosure.
• Close the latches.
2. Install the Stage 2 RFI tube.
• Connect the silicone couplers to the RFI MAF tube and
the throttle body.
• Connect the silicone hoses to the barbs on the Stage 2
tube as shown in the photo/diagram.
90˚ Silicone Hose
Straight Silicone Hose