Bully Dog 82222 Rapid Flow - Manual (Page 6)

7
RAPid FlOW inSTAllATiOn
Rapid Flow Exhaust # 82222
QUICk OVERVIEw FULL EXHAUST
Muffler
Straight Pipe
Straight Pipe
Down Pipe
Front Piece Driver Tail Pipe ‘Y’ Pipe
Driver Tail Pipe Tip
Passenger Tail Pipe Tip
Front Piece Passenger Tail Pipe
CLAMP AND HANGER PLACEMENT
Hanger D
Clamp
Hanger A
Clamps
Clamps
Hanger C
Hanger B
Clamp
In these steps you will install the rapid Flow Exhaust System. Bully Dog’s Exhaust Systems are one-
cut systems, meaning that you should only have to cut one pipe or less if installed correctly.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
tool s needed:
Silicone Spray Lubricant •
13mm Wrench •
Socket Wrench •
tape measure •
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM