Bully Dog 82021 Rapid Flow - Manual (Page 7)

8
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 82021
2. Hang each of the hangers. Hanger A is on the Down
Pipe so skip it for now. Hanger B and C will serve as
a dual purpose, serving as both hangers and clamps.
Hanger B will be at the front of the Muffler and Hang-
er C will be at the rear of the Muffler. Hanger D will
hold the Tail Pipe Tip.
3. Install the Down Pipe by hanging it from the hanger
and securing it to the turbo with the stock band clamp.
When installing the Down Pipe in order to get it to seal
correctly with the turbo, do not put hanger A on until
you have a good seal on the turbo. Once you have the
down pipe on the turbo sealed correctly then attach
hanger A to the down pipe.
4. Install the Adapter Pipe and secure with a clamp.
Hang the Hangers
Install Down Pipe
Loosen Bolt if Necessary
Install Adapter Pipe
Hanger A
Hanger B
Stock Band Clamp
Down Pipe
Down Pipe
Hanger A