Bully Dog 81205 Rapid Flow - Manual (Page 6)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81050,81205
QUICk OVERVIEw FULL EXHAUST
Tail Pipe Tip
Down Pipe
Catalytic Converter
(Stock)
Adapter
Pipe
24” Straight Pipe
Muffler
Front Piece Tail Pipe
Second Piece Down Pipe
CLAMP AND HANGER PLACEMENT
Hanger B
Hanger C
Hanger D
Hanger A
Clamps
Clamp
In these steps you will install the Rapid Flow Exhaust System. Bully Dog’s Exhaust Systems are one-
cut systems, meaning that you should only have to cut one pipe or less if installed correctly.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
Tool s Needed:
Silicone Spray Lubricant •
9/16” Wrench •
7/16” Deep Socket •
Socket Wrench •
Tape measure •
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM
Gasket and
Bolts
Gasket and Bolts