Bully Dog 81201 Rapid Flow - Manual (Page 6)

5
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81010,81201
QUICk OVERVIEw FULL EXHAUST
Muffler
Straight Pipe
Down Pipe
Tail Pipe Tip
Intermediate Pipe
Front Piece Tail Pipe
Hanger A
Hanger B
Hanger D
Hanger C
CLAMP AND HANGER PLACEMENT
In these steps you will install the Rapid Flow Exhaust System.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
Tool s Needed:
Silicone Spray Lubricant •
9/16” Wrench •
7/16” Deep Socket •
Socket Wrench •
Tape Measure •
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM