Calculated Industries 4095-C Pocket Reference Guide - Manual (Page 10)

P
ocket
R
efeRence
G
uide
— 17
Sixth press of  :
(Fractional mode) FRAC Std.

FRAC COnSt.

(repeats options) FRAC Std.
Seventh press of  :
(Mathematical Operation) MATH OrdEr

MATH CHAIn

(repeats options) MATH OrdEr
PERCENTAGE CALCULATIONS
The 

keys can be used for finding
a given percent of a number or for working
add-on, discount or division percentage
calculations. It can be used with any type
of number, in any dimension (feet, inch,
millimeter, etc.) and any type of convention
(non-dimensioned, linear, square or cubic).
Calculating Percentages
Find 18% of 500 feet:
KEYSTROKE DISPLAY
 
0.

     
 
(%) 90 FEET 0 INCH
Take 20% from 286 Feet 6 inches:
(cont'd)
KEYSTROKE DISPLAY

FRAC 0-1/32 INCH

FRAC 0-1/64 INCH

FRAC 0-1/2 INCH

FRAC 0-1/4 INCH

FRAC 0-1/8 INCH
 (repeats options) FRAC 0-1/16 INCH
Second press of  :
(Area displays) AREA Std.

AREA 0. SQ FEET

AREA 0. SQ INCH

AREA 0. SQ M

(repeats options) AREA Std.
Third press of  :
(Volume displays) VOL Std.

VOL 0. CU FEET

VOL 0. CU M

(repeats options) VOL Std.
Fourth press of  :
(Meter Linear displays) METR 0.000 M

(floating point) METR FLOAt M

(repeats options) METR 0.000 M
Fifth press of  :
(Decimal Degree displays) DEG 0.00º

(floating point) DEG FLOAt

(repeats options) DEG 0.00º
(cont'd)