Calculated Industries 8025 - Manual (Page 40)

P
OCKET
R
EFERENCE
G
UIDE
— 36
Default Settings
After a Clear All (Ç x), your calculator
will return to the following setting:
STORED VALUES DEFAULT VALUE
Weight per Volume 62.42796
LB
/
CU FT
If you replace your battery or perform a
Full Reset * (press O, hold down x, and
press o), your calculator will return to
the following settings (in addition to those
listed above):
PREFERENCE SETTINGS DEFAULT VALUE
Fractional Resolution 1/64
Area Display Standard
Volume Display Standard
Exponent ON
Meter Linear Display 0.000
Fractional Mode Standard
*Depressing the Reset button located above the
g key will also perform a Full Reset.
Accuracy/Errors
Accuracy/Display Capacity – Your calcu-
lator has a twelve digit display. This is made
up of eight digits (normal display) and four
fractional digits. You may enter or calculate
values up to 19,999,999.99. Each calcula-
tion is carried out internally to twelve digits.
APPENDIX