Calculated Industries 3423 - Manual (Page 21)

16 — Q
UALIFIER
P
LUS
® 4
X
Additional Memory Storage Keys (M10-M19)
In addition to M0-M5 (as described previously), your calculator has
ten additional independent Storage Registers — [M10] through
[M19] — that can also be used to permanently store
single , non-
cumulative values. To access these storage registers, use the follow-
ing keystrokes:
s ® • [#], with [#] being digits 0 – 9 . These
Storage Registers operate identically to M0-M5.
Examples:
Store 250 into M10, recall the value, then clear M10.
KEYSTROKE DISPLAY
2 5 0 s ® • 0 M10 250.00
O o 0.00
® • 0 M10 250.00
0 s ® • 0 M10 0.00
Store 350 into M11, recall the value, then clear M11.
KEYSTROKE DISPLAY
3 5 0 s ® • 1 M11 350.00
O o 0.00
® • 1 M11 350.00
0 s ® • 1 M11 0.00
Note: Repeat the above procedure for registers 12-19, using digits 2 – 9 .
Note: To clear all above values stored in Memory, press s x . Use this with caution
as s x clears away any stored values from your calculator’s register.