Calculated Industries 3442 - Manual (Page 27)

22 — M
ORTGAGE
Q
UALIFIER
P
LUS
®
P X2
(Cont’d)
Examples:
STEPS KEYSTROKES DISPLAY
Enter into memory 3 5 5 µ M 355.00
Enter into memory 2 5 5 µ M 255.00
Recall total in memory ® µ M 610.00
Subtract from memory 7 4 5 s µ M 745.00
Recall total in memory ® µ M -135.00
Replace memory 5 0 s ® µ M 50.00
Recall and clear ® ® 50.00
Memory Storage Keys (M0-M5)
In addition to the standard cumulative Memory (as described above),
your calculator has six independent Storage Registers—(M0)
through (M5)—that can be used to permanently store single, non-
cumulative values.
FUNCTION KEYSTROKES
Store single value in M0 s ® 0
Store single value in M1 s ® 1
Store single value in M2-M5 s ® 2 , 3 , 4 or 5
Clear register (e.g., M1) 0 s ® 1
Review stored value (e.g., M1) ® 1
Clear stored value* s x
*Perform a s x (Clear All) with caution, as it will clear any stored values from your
calculator’s registers, although it will not change any of your preference settings.
Example:
Store 175 into M1 and recall the value:
KEYSTROKES DISPLAY
1 7 5 s ® 1 M-1 175.00
O o 0.00
® 1 M-1 175.00
Note: Repeat the above procedure for registers M0-M5, using digits 0 – 5 . This
example is to show you that a value stored in these memory registers will hold, even
when the calculator is turned off.