Calculated Industries 3442 - Manual (Page 87)

82 — M
ORTGAGE
Q
UALIFIER
P
LUS
®
P X2
Reset
Manual Reset
If your calculator’s display should ever freeze or “lock up,” press
Reset — a small hole located to the left of the
O key — to perform
a total reset. (It is recommended you use a straightened paper clip,
as the hole is extremely small).
Keystroke Reset—Returning the Calculator to its
Original Factory Settings
You may at times want to reset your calculator to its factory settings
(i.e., reset all registers and Preference Settings to their original
default values). To do this, turn off the calculator, hold down the
x
key, and then turn it back on.
Repair and Return
Warranty, Repair and Return Information!
Return Guidelines:
1. Please read the Warranty in this User’s Guide to determine if
your Calculated Industries calculator, measuring device or elec-
tronic tool remains under warranty before calling or returning
any device for evaluation or repairs.
2. If your calculator won’t turn on, try pressing the “Reset Button”
first. If it still won’t turn on, check the batteries as outlined in the
User’s Guide.
3. If there is a black spot on the LCD screen, THIS IS NOT A
WARRANTY DEFECT. The unit can be repaired. Call for a
repair quote before returning your unit.
4. If you need more assistance, please go to our website at
www.calculated.com and click on Product Support, then Repair
FAQs.
5. If you believe you need to return your calculator, please speak to
a Calculated Industries representative for additional information!
Call Toll Free: 1-800-854-8075