Calculated Industries 3126 - Manual (Page 12)

Decimal Place Selection
You can use the [Set] key to perma-
nently select the number of decimal
places displayed. (Values are rounded
using 5/4 rounding.) You may do this
before or after finding an answer.
Press
[Set] followed by the number of
decimal places you wish to display:
[Set] 3 0.000
[Set] 2 0.00 (Default)
[Set] 1 0.0
[Set] 0 0.
[Set] [•] Floating Decimal
Note: To return to the standard two dec-
imal place setting, press [Set] 2.
Basic Math
Both calculators use standard chaining
logic. This means the first value is
entered, then an operator, then the
second value, then the Equal key to
get your answer.
A. 216 [+] 84 [=] 300.00
B. 216 [–] 16 [=] 200.00
C. 12 [x] 12 [=] 144.00
D. 144 [÷] 12 [=] 12.00
O
PERATING
B
ASICS
12 — Qualifier Plus ® IIcx