Calculated Industries 9430 - Manual (Page 10)

User’s Guide — 9
C ∏ - Prorated Amount
Used to enter the dollar value being
prorated. Used in combination with
the
B and E and ∏ keys.
See “Prorated Values” section.
C • - Rate
Multiplies a numerical or time value
by the rate or temporarily overrides a
stored rate.
Note: When entering a math string, C •
pressed after a unitless value will override the
previous rate. For example, if you enter
2•5Hx10C• , ScheduleCalc
uses 10 as rate instead of stored value.
s • - Store Rate
Permanently stores a unitless value
as a rate. You may clear the value by
performing a “Clear All” (
C x ) or
replace it with another value.
Timer Function Keys
T - Stopwatch / Timer
Used to access the Stopwatch/Timer
Function.
S - Split / Lap Function
Pauses the Timer display, without
stopping the Timer. If the S/LP
preference is set to the “Split” option,
the total time elapse from the start of
the Timer to the moment the
S key
is pressed will be displayed. If set to
the “Lap” option, the elapsed time
between presses of
S is displayed.