Calculated Industries 9430 - Manual (Page 21)

20 — ScheduleCalc ™
USING THE SCHEDULECALC
Important Note!
Unless otherwise indicated, all sample
problems in this section assume the
ScheduleCalc is in its default state
(CAL Act: Act mode used for all exam-
ples). If not, use
C x to reset the
calculator.
Hours per Day
d
Used to enter or convert values to
Days. In
Calender mode, one day is
equivalent to 24 hours. In Work mode,
the hours per day can be set by
entering the value and pressing
s d . Pressing r d displays
the Hour per Weekday Setting (default
is 8).
Hours per Week
w
Used to enter or convert values to
Weeks. In
Calendar mode, one week
is equivalent to 40 hours. In Work
mode, the hours per week can be set
by entering the value and pressing
s w . Pressing r w displays
the Hours per Week setting (default
is 40).
Note: Changing the Preference settings
“
MON-SUN ” modifies the “Hours per Day”
and “Hours per Week” values.