Calculated Industries 6130 v2.0 - Manual (Page 35)

Battery/Automatic Shut-Off
The Scale Master II is powered by two
3-Volt CR-2430 Lithium batteries (6
volts total). To conserve battery power,
the unit will shut itself off if it is not
used for 5 minutes. Press any key to re-
store power. All registers and settings
remain intact, including all temporary
registers.
Battery Replacement
When replacing the
batteries, carefully
insert batteries under
the metal clip. This is
the positive battery
terminal. Do not bend or force downward.
Turning the Click & Beep On/Off
The Scale Master II has a built-in wheel
click and count beep to let you know
when rolling or counting. To toggle the
click/beep off or on, press
[Sub] and
[Mode] simultaneously.
Full Reset/All Clear
To perform a complete reset of the unit
and return all registers to their initial
default values, press
[Reset] and [Sub]
simultaneously.
User’s Guide – 35