Brady 1024 - Manual (Page 20)

14 Getting Started
The second of the two labels is the Test Pattern Label. This label is used
to determine whether the Printhead is in need of replacement. 'Good' and
'Bad' Test Pattern labels are shown below:
Good test label indicates
Printhead is operating
normally.
Streaks in test label indicate a
dirty or faulty Printhead.
(See Ch. 3 for cleaning and
replacement).
Figure 1-12 Printhead Test Label
1.11 Available Options
External Cutter
The Printer can be ordered with an Optional Cutter Mechanism, (for
cutting tags and labels), and can be installed by the user. The Cutter
Option easily attaches to the front of the Printer and its modular cable
plugs into the back. When properly installed the cutter will cut each label
as it is printed.
Present Sensor
The Printer can either be ordered with the Present Sensor Option or the
option can be purchased and installed at a later date. The Present Sensor
allows the Printer to be configured for "one up" printing. With the sensor
installed, the Printer will not print the next label until the previous printed
label has been removed from the Printer.