Clearaudio PERFORMANCE SE - Manual (Page 18)

Performance SE
User manual
Page 18  clearaudio electronic GmbH 2012
7. Service
If any service or repair on all clearaudio products is necessary, please contact your dealer /
distributor or contact clearaudio directly. We can inform you as well about your nearest
service location.
Transportation advice:
If any transportation of the
Performance SE -turntable should be necessary, please always
remove the turntable platter. Otherwise serious damage can occur!
The bearing hole needs to be covered as well, to avoid any dust coming into the bearing.
Always take of the pulley of the motor unit as well, to prevent the motor shaft from any
damages.
PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if this unit has to be
transported and/or shipped. Any further questions you may have about this turntable should
be directed to the distributor or directly to clearaudio at
clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Tel/Phone: +49-(0)1805/059595
Fax: +49-(0)9131 /51683
www.clearaudio.de
www.analogshop.de
[email protected]