Performance se, Tonearm- and pick-up setting – Clearaudio PERFORMANCE SE User Manual
Page 9
Advertising
Performance SE
User manual
Page 9
clearaudio electronic GmbH 2012
4. Tonearm- and pick-up setting
Satisfy-Tonearm mounting
Please fix the base of the satisfy-tonearm on the basis
on your
Performance SE
-turntable chassis using the
short screws (M4x20).
Tighten the screws of the satisfy-tonearm base using
the allen screwdriver enclosed.
Pass the cables of the satisfy-tonearm carefully through the tonearm base.
Please make sure that the cables will not damaged or bent too much.
Picture 5: Satisfy - tonearm mount
base
Picture 6: Passing the Satisfy – tonearm through the tonearm base
Advertising