Bosch NEM 95 - Manual (Page 6)

6
Place cooktop into cutout. Insert clamping screw into the bracket and secure
cooktop to countertop.
Use a wood block to protect fragile countertop materials.
d CAUTION: Before installing, turn power OFF at the service panel. Lock sevice
panel to prevent power from being turned ON accidentally.
The branchĆcircuit breakers ampacity , the wire sizes and the connections must be
conform to the requirements of the National Electrical Code or Canadian Elektrical
Code and all local codes and ordinances.
Connect only to a 3Ćwire, 120/240Ćvolt power supply; the neutral conductor is not
required for the operation of the appliance. The potential at the power supply
electrical connections shall be 150ĆvoltĆtoĆground or less.
Attach flexible conduit to the junction box.
d CAUTION: To reduce the risk of electic shock and fire, do not use a flexible
powerĆsupply cord.
Connect the cooktop lead wires to the junction box supply wires in proper phase:
black (L1) to black
red (L2) to red
green wire to ground
Remove everything from the cooktop surface.
Clean cooktop surface with cooktop cleaning creme.
Turn on power supply.
Verify that elements function properly.
Electrical connection
Test the installation