Getting started – Dulce Systems Duo Quad User Manual
Page 5
Page 8
Quad & Duo Quad Installation and User’s Manual
1.2.
System Requirements
Operating Systems:
• Windows XP / Vista
• Mac OS X 10.4 or higher.
• Internet connection
(to download drivers and utilities)
PCI-e RAID Controller (x8):
• Apple Power Mac G5 with one available PCI-e slot.
• Apple Mac Pro with one available PCI-e slot.
• Windows compatible PC with one available PCI-e x8 slot or larger.
PCI-x RAID Controller (64 bit / 133MHz):
• Windows compatible PC with one available PCI-x slot.
1.3.
Technical Support
Phone
818-435-6007
FAX
818-576-0324
Web
www.dulcesystems.com
If the product requires service, please contact Dulce Systems’ Technical Support
and obtain an RMA number. Ship the product properly packaged to:
Dulce Systems
Attn: RMA
9620 Topanga Canyon Place,
Suite E
Chatsworth, CA 91311
Page 9
Quad & Duo Quad Installation and User’s Manual
2. Getting Started
The Quad and Duo Quad comes pre-assembled and ready for use, just install
the supplied PCI-e (PCI-express) or PCI-x RAID controller card in the computer,
connect the cables, install the software driver and RAID Console. If you are
using a Mac, you are good to go, the unit is pre-formatted for Mac OS X
operation in RAID 0 configuration. For Windows, a small format procedure is
needed.
2.1.
Packaging
Please do not discard the boxes and packing materials in case you
might need to reuse them later. Always ship the product in its original
packaging. Improperly packaged products will be subjected to shipping
damage, for which you will be liable for the repair.
2.2.
Check List
• Installation and User’s Manual
• Power Cord (North America user only)
• Set of keys
Quad:
• Quad (4 drive modules) system enclosure
• 4 disk drive modules
• A PCI-e or PCI-x RAID Controller with one Quad Channel SATA II port
• A 1-meter Quad Channel SATA II cable
Duo Quad:
• Duo Quad (8 drive modules) system enclosure
• 8 disk drive modules
• A PCI-e or PCI-x RAID Controller with two Quad Channel SATA II ports
• Two 1-meter Quad Channel SATA II cables