BMW III - Manual (Page 22)

Navigator III Owner’s Manual 
c
UstoMizinG the
n
aviGator
iii
c
UstoMizinG the
n
aviGator
iii
Volume
From the Main menu, touch Volume or simply
press and hold the SPEAK key. Touch and
to adjust the volume of the speaker.
Touch Mute , or press and hold the SPEAK key,
to mute and unmute the Navigator III.
Touch
Settings to open the Audio Settings; see
page 20 .
Touch Advanced to adjust the volume levels
for the voice prompts in relation to the other
audio output.
General Settings
From the Main menu, touch Settings >
General .
GPS
Touch Settings > General > GPS , or touch the
GPS Settings button on the GPS Info page.
Use Indoors—touch Yes to turn the GPS
receiver off and use the unit indoors.
Set Position—if
Use Indoors is selected, you
can select a location on the map as your current
location (position). Touch OK after you select
your location.
WAAS/EGNOS—disable and enable WAAS/
EGNOS. Wide Area Augmentation System
(WAAS) and Euro Geostationary Navigation
Overlay Service (EGNOS) are systems of
satellites and ground stations that provide GPS
signal corrections. To learn about WAAS and
EGNOS, visit www.garmin.com/aboutGPS/
waas.html.
Language
Touch Settings > General > Language .
Voice Language—change the language for all
voice prompts and messages. Touch the voice
you want to use, and touch OK . To delete that
voice from your Navigator III, touch Delete
and OK .
Your Navigator III contains two different
types of voice languages: text-to-speech and
pre-recorded. Languages noted with “TTS” are
text-to-speech (TTS) voices. The text-to-speech
voices “read” and “speak” the words that are
displayed on the Navigator III. The voices have
an extensive vocabulary, and they pronounce
the street names as you approach turns. The
languages without “TTS” are pre-recorded
voices, which have a limited vocabulary and do
not speak names of locations or streets.
NOTE: If you change the voice
language, your Navigator III must
restart to complete this change.