BMW III - Manual (Page 25)

22 Navigator III Owner’s Manual
c
UstoMizinG the
n
aviGator
iii
Zoom Level Detail—customize which map
items appear at various zoom levels. For each
map item, you can select Off , Auto , or a
maximum zoom distance.
NOTE: Adding more detail increases
the time it takes the map to refresh.
Detail Maps—enable and disable the detailed
maps loaded in your Navigator III.
Navigation Settings
1.. Touch. Settings .>. Navigation >. Vehicle ..
2. Select the vehicle type you want to
customize.
3.. Touch. Change Settings .
Preference—select a preference for route
calculations.
• Faster Time—routes calculated with this
setting are faster to drive but may be longer
in distance.
• Shorter Distance—routes calculated with
this setting are shorter in distance but may
take more time to drive.
• Off Road—creates a direct-line route from
your current location to your destination.
This may be useful when you are travelling
outside of detailed map coverage areas, or
where no roads exist.
Ask Preference—select whether the unit asks
for your preference each time it calculates a
route.
Next Turn Pop-up—turn on or off the Next
Turn pop-up window. Auto opens the window
as you near the turn.
Off-Route Recalculation—set the way the unit
responds when you are off the route. You can
silence the “off-route, recalculating” message
here.
Continuous Auto Routing—turn on or off
Continuous Auto Routing, which allows the
Navigator III to continually search for a better
route to your destination. This can be useful if
a traffic accident occurs or there are time-
restricted turns on the current route.
Avoidance Setup—set the way the unit handles
road types, traffic, custom, and other navigation
avoidances. For example, before you enter a
vacation route, you can set Major Roads to
Don’t Avoid , Minor Roads to Prefer , and Toll
Roads to Avoid .
To create custom avoids:
1. From the Avoidance Setup menu, touch
Custom Avoids .>. Add New Avoid Area .
or. Add New Avoid Road .
2. Touch the first corner, and touch Next .