3 menu structures, 1 instrument configuration, Menu structures – Metrohm 781 pH/Ion Meter User Manual
Page 154: Instrument configuration
9.3 Menu structures
144
780/781 pH/Ion Meter, Manual
9.3
Menu structures
The menu structures of the instrument configuration and the method
parameters of all operating modes are shown on the following pages.
This so-called instrument tree can also be used to control the pH/Ion
Meter via the serial interface. It is described in a separate document to-
gether with the exact syntax used (780/781 pH/Ion Meter Operation via
RS232, No. 8.781.1113). The document is available from your local
Metrohm agency.
9.3.1
Instrument configuration
CONFIG
├
report
│ ├
id1
│ ├
id2
│ ├
report id
│ ├
instrument id
│ ├
date & time
│ ├
method
│ ├
electrode id
│ ├
signature
│ └
line feed
│
├
print meas.value
│ └
print crit
────┬
immediate
┬
date & time
│
│
├
report header
│
│
└
calibration report
│
├
time
┬
date & time
│
│
├
report header
│
│
├
calibration report
│
│
├
time interval
│
│
└
stop time
│
├
drift
┬
date & time
│
│
├
report header
│
│
└
calibration report
│
├
plot
┬
time interval
│
│
├
time scale
│
│
├
time scale label
│
│
└
stop time
│
└
OFF
├
store meas.value
│ └
store crit
────┬
immediate, drift, OFF
│
└
time
┬
time interval
│
└
stop time
: