Metrohm 872 Extension Module IC Pump - Manual (Page 22)

3.3 Mounting the extension module below the IC instrument
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
14 ￭￭￭￭￭￭￭￭
872 Extension Module IC Pump
1
2
2
Figure 7 Mounting the base tray
1 Base tray 2 Cylinder screws
With washer.
￭ Set up the extension module.
￭ Optional: Set up further extension modules.
￭ Set up the IC instrument.
7 Connecting the extension module
￭ Plug a 6.2156.060 cable into the connector In of the extension
module and screw it tight.
￭ Plug the other end of the cable into the Extension module con-
nector of the IC instrument and screw it tight.
8 Optional: Connecting a further extension module
￭ Plug the cable 6.2156.060 or a longer 6.2156.070 cable (optional
accessory) into the connector In of the second extension module
and screw it tight.
￭ Plug the other end of the cable into the Out connector of the first
extension module and screw it tight.