Brother DCP-7020 - Manual (Page 27)

Getting started
2 - 3
2
Sleep Time
Setting the Sleep Time reduces power
consumption by turning off the fuser inside
the DCP while it is idle. You can choose how
long the DCP is idle (from 00 to 99 minutes)
before it goes into sleep mode. The timer is
automatically reset when the DCP receives
PC data or makes a copy. The factory setting
is 05 minutes. While the DCP is in sleep
mode you will see Sleep on the LCD. If you
try to print or copy in sleep mode, there will be
a short delay while the fuser warms up to its
working temperature.
1
Press Menu and or to select
1.General Setup .
Press Set.
2
Press or to select 4.Ecology .
Press Set.
3
Press or to select
2.Sleep Time .
Press Set.
4
Use the or to enter the length of
time the DCP is idle before it goes into
sleep mode (00 to 99).
—OR—
To turn off sleep mode, press Start and
Options simultaneously.
Press or to select Off .
Press Set.
5
Press Stop/Exit.
Note
If you want to turn off sleep mode, press Start
and Options simultaneously in Step 3.
Setting the LCD Contrast
You can change the contrast to help the LCD
look lighter or darker.
1
Press Menu and or to select
1.General Setup .
Press Set.
2
Press or to select
5.LCD Contrast .
Press Set.
3
Press or to select Light or
Dark .
Press Set.
4
Press Stop/Exit.
Printing the User Settings List
You can print a list of your settings.
1
Press Menu and or to select
1.General Setup .
Press Set.
2
Press or to select
6.User Settings .
Press Set.
3
Press Start.
General Setup
4.Ecology
Ecology
2.Sleep Time
General Setup
5.LCD Contrast
General Setup
6.User Settings