Brother DCP-7020 - Manual (Page 29)

Making copies
3 - 2
3
Using the Temporary
Copy keys
When you want to quickly change the copy
settings temporarily for the next copy, use the
Temporary Copy keys. You can use different
combinations.
Note
■
These settings are temporary, and the
DCP returns to its default settings 60
seconds after copying.
■
You can save the copy settings you use
most often by setting them as default.
(See Changing the default copy settings
on page 3-7.)
Enlarging or reducing the
image copied
You can select the following enlargement or
reduction ratios.
Auto * sets the DCP to calculate the
reduction ratio that best fits the size of paper.
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
Note
The Auto setting is available only when
loading from the ADF.
1
Load your document.
2
Press Enlarge/Reduce.
Temporary Copy keys
Press
Enlarge/Reduce
100%
104% EXE
→ LTR
141% A5
→ A4
200%
Auto *
Custom(25-400%)
50%
70% A4
→ A5
78% LGL
→ LTR
83% LGL
→ A4
85% LTR
→ EXE
91% Full Page
94% A4
→ LTR
97% LTR
→ A4